![Mea hana Rfid Tag [Kūʻai nui | OEM | ODM]](https://www.fjrfidfactory.com/wp-content/uploads/2024/04/logo.webp){kind=logo}
RFID Sticker Reader
NA WAIWAI
Nā huahana i hōʻike ʻia
RFID Cable Seal
The rfid cable seal is a tamper-proof, one-time design used…
UHF Textile Laundry Tag
The 10-Laundry5815 UHF Textile Laundry Tag model is suitable for…
Ibutton RFID
The DS1990A F5 module-equipped Ibutton RFID keychain is a sophisticated…
RFID Wristband system
ʻO Fujian RFID Solutions Co., Ltd. offers a comprehensive RFID wristband…
Nuhou Hou
Wehewehe pōkole:
The R58 is a contactless RFID Sticker Reader and barcode scanner that uses barcode recognition and RFID technology combined with Bluetooth communication. It has a low power consumption, standby time of up to 3 years, and can communicate from up to 10 meters. It has a high recognition rate, 1000mA/h high-capacity battery, and can be charged directly with a phone charger plug. The reader is compatible with Windows, IOS, Android, and other Bluetooth-enabled devices. It has a built-in buzzer chimes and can be connected wirelessly or via Bluetooth. Eia naʻe, it only reads RF cards and barcodes, not Bluetooth data.
Kaʻana like iā mākou:
Product Detail
The R58 is a one-dimensional/two-dimensional code/13.56M/125Khz contactless RFID Sticker Reader and barcode scanner based on barcode recognition, and RFID radio frequency identification technology and combined with Bluetooth communication. Not only low power consumption, standby time can be up to 3 years, changes the traditional way of transmission of data lines, also does not need to load additional power supply (the card reader brings a lithium battery), only needs to receive Bluetooth and card reader Bluetooth pairing successfully, you can directly bar code data /RFID card UID number, via Bluetooth uploaded to the device receiving end.
Characteristics
- No password authentication pairing is required to see direct pairing.
- The scanning code has a high recognition rate
- The 1000mA/h high-capacity battery is long standby
- The reader communicates from a distance of up to 10 meters.
- Fully charged for a long standby time. (Normal charging for 8 hours and standby time of up to 1 makahiki).
- The transfer speed is fast and there is no need to load the program.
- It can be charged directly with the phone charger plug.
- Data output default carriage return function, no manual selection required.
- Widely used in Windows, IOS, Android, and other devices with Bluetooth communication.
Nā palena huahana
| Project. | Parameters. |
| Model. | R58B/R58C/R58D |
| The working band | 13.56M/125Khz |
| The type of card read | Compatible IC ID cards such as the S50 S70 ULTRALIGHT CPU TK4100 EM4100 |
| The type of barcode | One-dimensional code, two-dimensional code, screen code |
| How to communicate | Bluetooth/2.4G wireless |
| grid | Default 8-bit 16-step (software-based format, e.g.: 10-bit 10-step/10-bit 16-step, etc.) |
| The reading distance | 20mm-60mm (specific valid card reading distance is related to card) |
| The read card rate | 106K/Bit |
| Read the card speed | 0.1S |
| Read card spacing | 0.5S |
| Read the card time | ＜100mS |
| Operating temperature | -20℃—70℃ |
| The working current | 100ma |
| Charging voltage | 5V |
| Battery capacity | 1000MA/H |
| feet | 105m×48mm ×25mm (product)/143mm×90mm×61mm (including packaging) |
| Weight | 50G (net weight)/200G (including packaging) |
| Operating system. | IOS, WinXP,Win 7, Win10, Android, LINUX, and other operating systems |
| it’s him | Status indicator: 4 color LED (“white” connection status, “ʻulaʻula” scan confirmation, “polū” indicator, “green” charging light)
Built-in buzzer chimes |
How to connect
This product is available in two connection modes, wireless 2.4g and Bluetooth
The wireless 2.4g connection method is as follows:
- Press and hold the scanner on key to power on
- Connect the wireless receiver to the device’s usb port.
- Open the appropriate software on the device to scan the entry.
The Bluetooth connection method is as follows:
- Press and hold the scanner on key to power on
- Turn on Bluetooth on your phone or other device and search for Bluetooth devices.
- Find a device named SYC Bluetooth and click Connect.
- Pair successfully with a “drop” sound, and the white light is always on.
Precautions
The reader only reads RF cards and barcodes, including 13.56M and 125Khz EM cards, one-dimensional codes, and two-dimensional codes, and does not support reading Bluetooth card data (Bluetooth card band is 2.4G);
When you swipe to read card data, please switch the input method of your phone or other platform to English state in order to more complete output card data;
The way to read the card, it is recommended that the card is lying close to the card reader naturally, with the card from the side quickly crossed the card reading method is not desirable, which does not guarantee the success of the swipe card.
The configured data cable does not have a communication function and is limited to charging the card reader, which cannot use the data cable to upload data to the operating platform.
There are more factors affecting the reading distance, because of the use of different protocols, different antenna designs, the surrounding environment (mainly metal) and different cards, etc., will affect the actual reading distance;
The reader brings its own sleep system. When the reader is not in use, the 60S automatically hibernates, if you need to turn it back on, press the button again, and the reader can re-enter the working state.
