RFID Sticker nyeem ntawv

CATEGORIES

Cov khoom tshwj xeeb

Xov xwm tshiab

RFID Sticker nyeem ntawv

Qhia luv luv:

R58 yog ib tug contactless RFID Sticker Reader thiab barcode scanner uas siv barcode paub thiab RFID technology ua ke nrog Bluetooth kev sib txuas lus. Nws muaj kev siv hluav taws xob tsawg, standby time of up to 3 xyoo, and can communicate from up to 10 meters. It has a high recognition rate, 1000mA/h high-capacity battery, and can be charged directly with a phone charger plug. The reader is compatible with Windows, IOS, Android, and other Bluetooth-enabled devices. It has a built-in buzzer chimes and can be connected wirelessly or via Bluetooth. Txawm li cas los, it only reads RF cards and barcodes, not Bluetooth data.

Xa Email Rau Peb

Qhia rau peb:

Product Detail

The R58 is a one-dimensional/two-dimensional code/13.56M/125Khz contactless RFID Sticker Reader and barcode scanner based on barcode recognition, and RFID radio frequency identification technology and combined with Bluetooth communication. Not only low power consumption, standby time can be up to 3 xyoo, changes the traditional way of transmission of data lines, also does not need to load additional power supply (the card reader brings a lithium battery), only needs to receive Bluetooth and card reader Bluetooth pairing successfully, you can directly bar code data /RFID card UID number, via Bluetooth uploaded to the device receiving end.

RFID Sticker nyeem ntawv RFID Sticker Reader01

 

Characteristics

  • No password authentication pairing is required to see direct pairing.
  • The scanning code has a high recognition rate
  • The 1000mA/h high-capacity battery is long standby
  • The reader communicates from a distance of up to 10 meters.
  • Fully charged for a long standby time. (Normal charging for 8 hours and standby time of up to 1 xyoo).
  • The transfer speed is fast and there is no need to load the program.
  • It can be charged directly with the phone charger plug.
  • Data output default carriage return function, no manual selection required.
  • Widely used in Windows, IOS, Android, and other devices with Bluetooth communication.

RFID Sticker Reader002

 

Khoom parameters

Qhov project. Parameters.
Qauv. R58B/R58C/R58D
The working band 13.56M/125Khz
The type of card read Compatible IC ID cards such as the S50 S70 ULTRALIGHT CPU TK4100 EM4100
The type of barcode One-dimensional code, two-dimensional code, screen code
How to communicate Bluetooth/2.4G wireless
grid Default 8-bit 16-step (software-based format, e.g.: 10-bit 10-step/10-bit 16-step, lwm.)
The reading distance 20mm-60mm (specific valid card reading distance is related to card)
The read card rate 106K/Bit
Read the card speed 0.1S
Read card spacing 0.5S
Read the card time <100mS
Ua haujlwm kub -20℃—70℃
The working current 100ma
Charging voltage 5V
Roj teeb muaj peev xwm 1000MA/H
feet 105m×48mm ×25mm (product)/143mm×90mm×61mm (including packaging)
Qhov hnyav 50G (net weight)/200G (including packaging)
Operating system. IOS, WinXP,Win 7, Win10, Android, LINUX, and other operating systems
it’s him Qhov taw qhia xwm txheej: 4 xim LED (“dawb” connection status, “liab” scan confirmation, “xiav” indicator, “ntsuab” charging light)

Built-in buzzer chimes

RFID Sticker Reader06

 

How to connect

This product is available in two connection modes, wireless 2.4g and Bluetooth

The wireless 2.4g connection method is as follows:

  • Press and hold the scanner on key to power on
  • Connect the wireless receiver to the device’s usb port.
  • Open the appropriate software on the device to scan the entry.

The Bluetooth connection method is as follows:

  • Press and hold the scanner on key to power on
  • Turn on Bluetooth on your phone or other device and search for Bluetooth devices.
  • Find a device named SYC Bluetooth and click Connect.
  • Pair successfully with adropsound, and the white light is always on.

RFID Sticker Reader03

 

Cov kev ceev faj

The reader only reads RF cards and barcodes, including 13.56M and 125Khz EM cards, one-dimensional codes, and two-dimensional codes, and does not support reading Bluetooth card data (Bluetooth card band is 2.4G);

When you swipe to read card data, please switch the input method of your phone or other platform to English state in order to more complete output card data;

The way to read the card, it is recommended that the card is lying close to the card reader naturally, with the card from the side quickly crossed the card reading method is not desirable, which does not guarantee the success of the swipe card.

The configured data cable does not have a communication function and is limited to charging the card reader, which cannot use the data cable to upload data to the operating platform.

There are more factors affecting the reading distance, because of the use of different protocols, txawv kav hlau txais xov tsim, the surrounding environment (mainly metal) and different cards, lwm., will affect the actual reading distance;

The reader brings its own sleep system. When the reader is not in use, the 60S automatically hibernates, if you need to turn it back on, press the button again, and the reader can re-enter the working state.

RFID Sticker Reader04 RFID Sticker Reader05

Tso Koj Cov Lus

Lub tsev loj loj grey nrog ntau lub qhov rais xiav-tinted thiab ob lub ntsiab nkag sawv zoo siab hauv qab qhov tseeb, ntuj xiav. Kos nrog lub logo "PBZ Chaw Ua Lag Luam Lag Luam," nws embodies peb "Txog Peb" lub hom phiaj ntawm kev muab cov kev daws teeb meem ua lag luam zoo tshaj plaws.

Tau kov nrog peb

Qhib kev sib tham
Luam theej duab
Nyob zoo 👋
Peb puas tuaj yeem pab koj?